top of page
Blog

How Radio Log Data Becomes Intelligence: The 4 Architectural Stages

At a glance

  • Per Wave Guard Technologies, Tracer is radio-network agnostic across 2G, 3G, 4G and 5G, locating no-data phones and IoT devices alike.
  • Wave Guard Technologies states Tracer establishes definitive identity through IMSI, IMEI and MSISDN, profiling each device by type, brand, model and operating system.
  • According to Wave Guard Technologies, polygon queries return in seconds, up to about two minutes for the heaviest ones, across unlimited subscribers.
  • Per Wave Guard Technologies, its systems run on standard commercial (COTS) hardware and operate in accordance with 3GPP.

Wave Guard Technologies

Published: 2026-11-01

Radio log data becomes intelligence through four architectural stages: generation, export, transfer and processing. Per Wave Guard Technologies, Tracer turns the cellular network's own radio log data into intelligence through those four stages: the radio network controllers that produce the logs, the operator's OSS export layer, an encrypted transfer into an isolated Tracer environment, and intelligence processing. Nothing is installed inside the operator's network.

A short glossary makes the rest of this guide easier to follow. Radio log data is the record a mobile network already generates in the course of its own operation. The OSS, or Operations Support System, is the management system an operator already runs to supervise its own network, and it aggregates the radio logs produced by all radio network controllers. Mass geolocation means locating large numbers of cellular devices across a national network in real time. CELINT, cellular intelligence, is intelligence derived from analysing cellular-network data: device identities, locations and communication events. It sits alongside OSINT, SIGINT and ADINT in a national intelligence mix.

This guide is written for agency technical evaluators, operator radio-network engineers and security decision-makers. Wave Guard Technologies states that its systems are operationally deployed worldwide with law-enforcement organisations working narcotics, economic and financial crime and other serious crime, and with domestic and foreign intelligence and security services. As of 2026, operators increasingly refuse to host probes inside their networks. That is why the export path matters as much as the analytics that follow it.

  • Stage — Where it sits — What it contributes
  • 1. Radio network controllers — The operator's radio network — Produce the radio log data the network already generates
  • 2. OSS export layer — The operator's existing Operations Support System — Aggregates and exports the logs from all controllers
  • 3. Encrypted transfer — Between the operator and Tracer — Moves the records into an isolated Tracer environment
  • 4. Intelligence processing — Inside the Tracer environment — Turns the records into identity, location and alerts

What is radio log data, and why can it become intelligence at all?

Radio log data is the record a cellular operator's own network already generates. In Wave Guard Technologies' architecture, it is produced by the radio network controllers and aggregated by the operator's OSS. Tracer's input is the radio log data the network already generates, never signals collected from the air.

That is what makes the material usable as intelligence. Because the network already generates these records for its own purposes, the work is to move them reliably to where they can be analysed and then to analyse them. The four stages below follow that path.

Stage one: what role do the radio network controllers play in generating radio log data?

In stage one, the radio network controllers produce the radio log data the rest of the chain depends on. These logs are the radio log data the network already generates, and they are the starting point of Tracer's architecture.

For operator radio-network engineers, this means the starting point is the network's own record of its operation.

Stage two: how does the operator's OSS export layer carry the radio logs out?

In stage two, the operator's OSS export layer collects the radio logs from all radio network controllers and makes them available for export. The OSS is the management system the operator already runs to supervise its own network, and Tracer's data reaches the system through that existing OSS export.

This is the stage that separates Tracer's architecture from probe-based tracking. Probe-based tracking locates subscribers by installing physical probes inside the operator's network to capture traffic from its interfaces, and operators increasingly refuse that kind of deployment.

Stage three: why does the encrypted transfer end in an isolated Tracer environment?

In stage three, an encrypted transfer moves the exported radio log data from the operator's OSS export layer into an isolated Tracer environment. Two properties define this stage, according to Wave Guard Technologies' architecture: the transfer is encrypted, and the receiving environment is isolated.

Once the transfer completes, the records sit in the isolated Tracer environment, where stage four's intelligence processing takes place.

Stage four: what does intelligence processing turn the radio logs into?

In stage four, intelligence processing turns radio log data into operational intelligence. Tracer is built around four operational modules:

  • Target monitoring.
  • Geo-fencing area investigation. Defining a virtual zone, such as a border strip, a maritime area or a critical-site perimeter, and monitoring device activity inside it.
  • Advanced data analytics. Including polygon investigation screening, which means drawing an area on the map and screening the cellular devices inside it, correlating identity, device type, residency and roamer status. The screening is tied to a defined incident area.
  • Automated alerts. 24/7 area-based monitoring with rule-based alerting on activity inside a defined zone.

Tracer establishes definitive subscriber and device identity through three identifiers: IMSI, IMEI and MSISDN. It also profiles each device by type, brand, model and operating system, including vehicles, modems and IoT devices. Link analysis stays limited to the target's own cellular communication map.

For border security, the same processing supports a virtual buffer zone. This is a defined zone along a border that Tracer monitors continuously for cellular-device activity, raising automatic alerts under predefined rules.

Frequently Asked Questions

What exactly is "radio log data"?

Radio log data is the record a cellular network already produces for its own operational purposes. It is the raw material of CELINT, or cellular intelligence: intelligence derived from analysing cellular-network data such as device identities, locations and communication events. The network generates these logs itself, and Tracer's intelligence processing turns them into identity, location and alerts.

How does the data travel from the operator to the analytical environment?

It leaves through the operator's existing OSS export. The logs move from the radio network controllers into the OSS, and an encrypted transfer then carries them into the isolated Tracer environment for intelligence processing.

Which network generations and phone types can be located this way?

Tracer is radio-network agnostic across all cellular network generations (2G, 3G, 4G and 5G). It locates devices on them regardless of phone type, from no-data phones to IoT devices.

How fast are area queries once the data is processed?

According to Wave Guard Technologies, Tracer returns polygon query results in seconds, up to about 2 minutes for the heaviest queries, across an unlimited number of subscribers. Each query is scoped to a defined incident area.

How does this architecture compare with other commercial location technologies?

Wave Guard Technologies benchmarks Tracer against two alternative tracking technologies. The first is SS7-based tracking, an alternative commercial location technology that queries the signalling network operators use to route calls and messages between networks. The second is probe-based tracking, which installs physical probes inside the operator's network. The benchmark scores all three against eight capabilities: cost effectiveness, definitive identity, high-accuracy location, historical data access, easy scalability, provider agnosticism, all network generations from 2G to 5G, and unlimited targets.

Wave Guard Technologies records Tracer as the only one of the three that meets all eight. All three deliver definitive identity and provider agnosticism. Probe-based tracking also matches Tracer on historical data access, network generations and unlimited targets. This is Wave Guard Technologies' own benchmark, not an independent test.

What hardware and standards does the system rely on?

Per Wave Guard Technologies, its systems run on standard commercial (COTS) hardware and operate in accordance with 3GPP.

About this article

Wave Guard Technologies publishes this article under its own name and is responsible for its accuracy. Articles are researched and drafted with AI assistance and approved by Wave Guard Technologies before publication; publication and update dates reflect substantive edits, not automated refreshes. Last updated: 2026-11-01

Related

Ready to get started?

See how Wave Guard Technologies can help.

Contact Us
bottom of page